How To Tape Plugs For Stretching? (Solved)

Stretching with tape First, wrap your plugs or tunnels with Teflon or PTFE tape. Soak or wipe your tape with alcohol before use to kill any bacteria that may be present. You could start off with 3-4 rounds of tape, and increase the number with every stretching session.

What’s the best way to stretch ear plugs?

  • The tape wrapping method is usually used once you get above a 0 gauge. The tape wrapping method helps to stretch your lobes slowly and carefully. It is used by a lot of people who stretch over an inch as well. 1. Take tape (we will talk about the kinds of tape a little later) and wrap it around your current plugs about two or three times.

What kind of tape do you use to stretch your ears?

PTFE Tape. PTFE is a great and inexpensive tape that you can use to stretch. The good things about it is that it is very reasonable in price, non-adhesive so it only sticks to itself, super thin so you can slowly increase your size, and it doesn’t irritate your ears like some tapes do (such as electric tape).

You might be interested:  How Often To Change Tape For Stretching Ears? (Correct answer)

Can you use electrical tape for ear stretching?

I personally have only used one kind of tape and it has served me amazingly: Black Vinyl Electrical Tape. Being vinyl the non-adhesive side of the tape is incredibly smooth. This makes getting it into and out of the ear incredibly easy. Secondly, it’s ability to stretch.

Can you stretch with plugs?

To stretch with the tape wrapping method, take a set of plugs in your current size and do 2-3 wraps of tape around them to slowly increase the size of your piercing. Only use PTFE or bondage tape. Remove the tape and clean the jewelry and your ears. Apply new tape daily.

How do you make bondage tape stick?

Go only a few times (2 or 3) around the plug at a time. It should be a bit tight but not forced in. If it’s bunching it means you’re trying to fit too big of a size in. Are you oiling the tape before you put it on your plug?

How long do you leave tapers in before putting plugs in?

How long should I wait between each stretch?

  1. 16g to 14g – 1-2 months.
  2. 14g to 12g – 1-2 months.
  3. 12g to 10g – 2-3 months.
  4. 10g to 8g – 2-3 months.
  5. 8g to 6g – 3-4 months.
  6. 6g to 4g – 3-4 months.
  7. 4g to 2g – 3-4 months.
  8. 2g to 0g – 4-5 months.

How do you start stretching your ears with tapers?

Begin pushing the taper through the hole, inserting the thinner side into the piercing first. Go slowly. If you experience any discomfort, you’ve done too much. Put your plug in at the thicker end of the taper so you can insert it into the stretched piercing immediately.

You might be interested:  How Can Stretching Helps Your Workout? (Solution)

Can I stretch my ears every 2 weeks?

Stretching your ear too quickly can tear the skin. Only increase your jewelry by one size (2 gauge) at a time. Wait 4 to 6 weeks before increasing sizes. Wait for inflammation and pain to subside before increasing the size of your gauge.

How can I size up my gauges without it hurting?

To prepare your ears for stretching, apply a warm compress to the piercing for several minutes in order to ease up the tissue and make the stretch easier. Then, wash the area, rinse well and pat dry. Once you’re ready for the stretch, apply oil around the perimeter of your piercing.

How can I enlarge my ear hole?

Go to a piercer and get your lobes pierced with a needle. You should wait at least five months before beginning a stretch, to let your ear fully heal. Getting a piercing at a professional body piercer with a needle is the safest way, and they can pierce your ear at a bigger size than if you got it done with a gun.

What are tapers for ears?

A taper is a cone or spike shaped piece of jewelry that is used to stretch a piercing up a size. The shape of the taper allows the piercing to stretch smoothly as the taper is pushed through the ear. Certain tapers can also be worn as jewelry. Tapers are very helpful in stretching up the sizes between 14 and 0 gauge.

What is self adhesive tape?

Pressure-sensitive tape, PSA tape, self-stick tape or sticky tape consists of a pressure-sensitive adhesive coated onto a backing material such as paper, plastic film, cloth, or metal foil. It is sticky (tacky) without any heat or solvent for activation and adheres with light pressure.

Leave a Reply

Your email address will not be published. Required fields are marked *